: Connect your MikroTik router to a power source and your computer to the router. The most common method to connect to the router for initial configuration is via Ethernet. For direct access, use a console cable to connect to a computer.
If you previously set a password and forgot it, you must perform a hardware reset by holding down the Reset button while plugging in the power cord until the LED light flashes.
: Ensure a basic "masquerade" NAT rule is active (IP > Firewall > NAT) to allow LAN devices to access the internet through the WAN interface [5, 18]. For more complex environments, the MikroTik Smartphone App mikrotik router quick setup link
Select this if your ISP requires a username and password (common for DSL connections).
Upon first login, you are immediately prompted to set a strong password. Failure to do so leaves the device vulnerable to remote compromise (e.g., Botnet attacks). : Connect your MikroTik router to a power
Before visiting the quick setup link, ensure your hardware is properly connected:
In the section on the left, set up your local Wi-Fi network: If you previously set a password and forgot
If you misplace your newly created admin password, you must perform a hardware reset. Hold down the physical "Reset" button on the router body while plugging in the power cable. Hold until the LED light flashes, then release.